Gate Housing. The Automatic Barrier Gate housing is constructed of 3mm powder coated aluminum. All seams are welded and the interior framing is a 5mm aluminum welded angle. 

The reinforced door provides added strength to the cabinet. It has 6 louvers for ventilation and is secured by a vandal resistant flush mounted keyed lock. The standard color is powder coated white with other colors available upon request.

The gate housing door is mounted to the rear of the cabinet to enable servicing of the unit away from the vehicle path, allowing easy access and safety. For limited rear space situations the door can be mounted to the front of the cabinet.

Motor Drive. The gate arm is driven by a 1/3 HP heavy duty, high output torque, 240V single phase, instant reverse motor with a duty cycle exceeding 800 operations per hour. The motor is connected by two V-belts to a heavy duty single reduction gear box. The gear box transmits power to the gate arm drive shaft through a harmonic acting crank and connecting rod with adjustable limit switches and cams regulating the gate arm travel. The crank, connecting rod and mainshaft are manufactured of heavy duty rolled steel plated to deter rust and corrosion with oil light self-lubricating bearings. The limit switches and regulating cams eliminate the need for mechanical stops and braking devices.

Gate Arm. The arm is available in 3 or 4 meter lengths and is constructed of aluminum or wood. (Max. weight 0.8 kg/m) The aluminum arm is constructed of 1.6mm x 60mm round aluminum, powder coated (standard white) with red reflective film. It is equipped with an internal sleeve to ensure a clean break and easy reinstallation if the arm is heavily hit. 

The wooden arm is constructed from western red ceder or similar, painted white with black diagonal stripes. Its gate flange is equipped with a cutting edge to ensure a clean break and easy reinstallation if the arm is heavily hit.

The arm can be mounted on either a left or right hand mount. This allows for best positioning in difficult situations and correct alignment of dual gates.

 Accessories:

 
• Barrier arm alarm to monitor breakages or removal
• Hold down magnets
• Pendulum support
• Safety edge
• Folding gate arm (optional) for restricted headroom installations
• Signage warning signs and stop signs

Wt. excluding boom: 46 kg

Max. arm length: 4m

Motor Type: 240V split phase

Frequency: 50 Hz / 60 Hz

Speed: 0.7 or 1.5 seconds

Power Consumption: 2.6 amps